Acewell HG-20 Heated Grips with integrated control

In Stock

The neatest heated grips on the market

Acewell HG-20 heated grips fit any 22mm handlebars to work with existing twist grip throttle tubes
Push button temperature controller and LED power level display built into the left heated grip.
No additional switches or external control box makes for an easier installation
The integrated control/display module keeps the original look of the bike but still allows full functonality of the grips
5 levels of grip heat temperature
5 colour illuminated LED control button to indicate selected temperature
Grips will remember the last temperature setting between rides
Classic slimline design which suits all types of motorcycle
Hard wearing and anti-slip silicone outer layer provides a soft but durable grip texture
Highest grade grip material will not become sticky, even after years of use.
Low voltage detection - the heated grips automatically switch off to help protect against a flat battery.
Voltage cutout is adjustable from 11.8V to 12.8V, see video below
Heated grips can be connected directly to the battery terminals without worrying about forgetting to switch them off
Simple installation with minimal wiring and detailed fitting instructions.
119mm long
Left grip inner diameter is 22mm to fit 7/8" bars, right grip has a larger inner diameter to fit onto a throttle tube
Amp draw is between 0.6A - 3.3A, depending on which heat level is used.

See the two videos below from Oz ADV Rider, covering both the installation and how to adjust the voltage cutout:

(ACE-HG20)