|
Fuel sender with waterproof connector ACE-TS [ACE-TS]
This Acewell fuel sender installs into your fuel tank from above. Requires a 35mm dia hole in the top of the tank for installation. Includes a rubber grommet for a firm seal.
The tank will read 'Empty' when the float is at full extension, 128mm from the top of the tank.
The tank will read 'Full' when the float is 40mm from the top of the fuel sender.
At full extension the top of the float will be 155mm from the top of the sender, however, the float position can be adjusted to suit the shape of your tank by bending the float arm.
This fuel sendor has a 100 ohm output. It and is comptible with all Acewell meters. It can also be used with other brand fuel gauges which can accept a 100ohm signal.
The Acewell meters that include a fuel gauge have LED 7 bars. The output of the sender determines how many bars are displayed, as follows:
Fuel Gauge display
| Bars displayed |
Sener Resistance (ohms) |
| 7 |
0-10Ω |
| 6 |
11-20Ω |
| 5 |
21-35Ω |
| 4 |
36-45Ω |
| 3 |
46-60Ω |
| 2 |
61-75Ω |
| 1 |
76-90Ω |
| 1 flashing |
91-100Ω |
7 0~10
6 11~20
5 21~35
4 36~45
3 46~60
2 61~75
1 76~90
0-Flash 91~100
|
